Steam Hose Goodrich1/2" ID x 25 ft 1/2 NPT Fitting Line 450 F 250 PSI Flexsteel

Description

I got these hoses from the NYC subway system as overstock.   apparently some subway cars used steam to heat the cars and these hoses where used as coupler hoses from car to car.   They are NEW, were never used.    They were sold in their surplus auction.    we bought 2000 of them.
Hoses are by Goodyear and Goodrich.   Both have the same specs.
Steam clamps on the end may vary but is very close to the photo.
Steam clamps may have some surface rust on them.    sorry.
Shipping weight is 16 lbs. per hose.
Shipping is .50 for the first one and only .50  for each additional
Item was purchased on Grainger for over 1
Item #
2P035
Mfr. Model #
53907001607407
UNSPSC #
40142007
Catalog Page #
3938
Shipping Weight
13.8 lbs.
Country of Origin
United States Of America
Country of Origin is subject to change.
Technical Specs
Item
Steam Hose
Type
Coupled Assembly
Hose Inside Dia. (In.)
1/2
Hose Length (Ft.)
25
NPT (In.)
1/2 (M)NPT x 1/2 (M)NPT
Hose Outside Dia. (In.)
1-1/16
Color
Black
Max. Pressure (PSI)
250
Temp. Range (F)
0 to 450
Safety Factor
10:1
Tube Material
Synthetic Rubber
Reinforcement
Double Wire Braid
Meets
RMA Class C
Flexsteel® 250 Steam
Industrial Hose
>
Products
>
Steam Hose
> Flexsteel® 250 Steam
APPLICATION:
For cleaning, heat control, fire prevention, pumping, thawing, blow-out service, steam pumps and hoists in open-end or permanent installation operations. It is used in refineries, shipyards, chemical plants, steel mills, foundries and heavy industrial applications where high strength is required and where severe environmental conditions are encountered.
CONSTRUCTION:
TUBE: Pyrosyn® synthetic rubber
COVER: Black or Red Pyrosyn, smooth finish, pin-pricked
REINFORCEMENT: Braided steel
TEMPERATURE: -40°F to 450°F (-40°C to 232°C)
ID
NOM. OD
MAX. WP
WEIGHT
in.
mm.
in.
mm.
psi.
Mpa.
lb./ft.
kg./m.
1/2*
12.7
1.06
26.9
250
1.72
0.45
- See more at: https://www.goodyearep.com/productsdetail.aspx?id=2486#sthash.xplnEqo4.dpuf