ROCHESTER QUADRAJET CARBURETOR BASE GASKET 5/32 75-80 BUICK PONTIAC 301 G1043

Description

Please note before buying that there are approx. 26 different versions of the base gaskets used for the Rochester Quadrajets so look carefully at yours and compare it to our pictures to make sure it is the same before purchase. If you have any doubt message us your carburetor model number and we will see if we can help.We will be adding others as we stock them.
This is a 5/32 inch thick carburetor base gasket used on some of the Rochester Quadrajet 4 barrel carburetors found on 1975 through 1980  Pontiac and Buick passenger cars including the 301 engines. One distinguishing shape is this gasket has 2 small tabs that sticks out between the 2 bottom bolt holes across the bottom and while the primary holes are separate the area between the secondary hole is open. It is also a fiber type gasket unlike the thinner paper ones.
Following is a generic listing by vehicle. This is only a basic reference and please make sure your gasket looks like the one pictured above as some of the applications below may have came from the factory with a different gasket depending on build date, transmission choice, series and trim of truck, Canada only versions etc. Some of these vehicles may take a different gasket as there is some crossover between them. Some may appear as duplicated however they show up in the manufacturers data with different notes so we included them as shown.
Buick  1975 1976 with 455 engine.
Buick  1979 1980 with 301 engine, auto, except Canada.
Buick  1979 with 350 engine, auto, except Canada.
Chevrolet  1980 with 301 engine, auto, turbo.
Pontiac  1978 1979 1980 with 301 engine, auto.
Pontiac  1979 with 350 engine, auto, except Canada.
Pontiac  1980 with 301 engine, auto, turbo.
Pontiac  1981 with 301 engine, auto, Canada.
Pontiac  1981 with 301 engine, except carburetor numbers 17081273  17081274.
These are nitrate coated so they do not leak and are great for helping to keep some of the heat away from your carburetor compared to just a thin paper gasket.
Made in the U.S.A.
We ship by USPS First Class so you will get your parts sooner than those using Parcel. This part will also be shipped in a box as opposed to a padded envelope so you get it without any damage.
We have other listings for this same gasket along with an air cleaner gasket and also for a pair of these to save a little money.
Be sure and check our store for more carburetor and fuel systems service parts.We have been providing tech and working with the modular style carburetors since the early 90's.
Warning to U.K buyers. Please be aware we have been informed that Parcel Force has been charging a " handling fee" as well as making you come pick them up on USPS packages coming into your country and in some cases between the customs fees and this charge it can be 1/2 or more of the item cost. You will have the same issue with any other seller but we wanted to make sure you were aware of this prior to purchase.
International buyers are responsible for all Customs fees and any additional fees that their country may add to incoming packages as those are something we have no control over.
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov