MyTrickRC Traxxas TRX6 RC Hauler LED Light Kit with UF-7R Controller MYK-TXTT

Description

MY TRICKRC
Traxxas TRX6 Ultimate RC Hauler LED Light Kit with UF-7R Controller
MYK-TXTT
MyTrickRC's Traxxas Ultimate RC Hauler Kit is the perfect light kit upgrade for your Ultimate RC Hauler Tow Truck.
This incredible kit uses MyTrickRC's new UF-7R Controller. One of the coolest aspects of the Traxxas Ultimate RC Hauler Kit is the UF-7R's flexibility, allowing you to configure your light system different ways depending on how you want it!
By slightly changing the way LEDs are connected, and selecting a different MODE, you can easily configure, or change up your settings. Everything you need for all configurations is included in the kit.
SETUP #1 - Functioning Turn Signals
If you want a scale setup with functioning Turn Signals the Traxxas Ultimate RC Hauler Kit can do that. Set the UF-7R to MODE 7 and connect LEDs as shown:
Port A - Reverse
Port B - Left Rear Tail/Brake/Turn (use 2-way cables)
Port C - Right Rear Tail/Brake/Turn
Port D - Front Right Turn
Port E - Headlights
Port F - Front Left Turn
*This configuration doesn't support On/Off Control of Flasher Bar. MyTrickRC has solution for this coming soon.
SETUP #2 - Staged Lighting Control
Or, if you prefer a setup for Rock Crawling that has Scale Brakes and Reverse, and the ability to power a Flasher Bar then you want setup #2. By connecting UF-7R's Input 2 to the transmission servo, you can use the transmission switch to toggle through staged lighting. Staged lighting starts with all Lights OFF. the first toggle turns on front running lights, Tail/Brake, and Reverse. The next level adds Headlights, and the last level turns our port G which you can use to power a Flasher Bar, and/or High Power LEDs like Rock Lights, or Utility Lights. Set the UF-7R to MODE 3 and connect LEDs as shown:
Port A - Reverse
Port B - Blinking (not used)
Port C - Tail/Brake
Port D - Front Running Lights
Port E - Headlights
Port F - Center Bake (not used)
Port G - High Power Output (not used)
SETUP #3 - Remotely Controlled Strobes
For Emergency Use Setup with wig-way strobes, set the UF-7R to MODE 10 and connect LEDs as shown:
Port A - Wig-Wag Strobe (side A)
Port B - Tail/Brake (use 2-way cables)
Port C - Slow Strobe (not used)
Port D - Wig-Wag Strobe (side B)
Port E - Headlights
Port F - Slow Strobe (not used)
Port G - Flasher Bar (optional)
Includes:
1 - UF-7R Light Controller
2 - 5mm Single White LEDs (700mm)
2 - 5mm Single Red LEDs (700mm)
1 - 5mm Dual White LEDs
2 - 3mm Single Orange LEDs
2 - 5mm Single Red LEDs
2 - 2-Way LED Splitters
Zip Ties and Zip Tie Mounts for clean wiring management
Attack Scale Bumper Stickers
*This configuration does support On/Off Control of a Flasher Bar, along with the strobes. Connect UF-7R's input 2 to the transmission channel on your receiver. You will have Tail/Brake function and Strobes in the Front Running Lights and Reverse. Tail/Brake will function normally.
**The Traxxas Ultimate RC Hauler Light Kit does not come with a Flasher Bar, that is sold separately.