MyTrickRC Element RC Ecto LED Light Kit with HB-2 Controller MYK-ECTO

Description

MY TRICKRC
Element RC Ecto LED Light Kit with HB-2 Controller
MYK-ECTO
The perfect complement to your Element RC Ecto, is the ability to go anywhere at anytime; day or night!
The Element RC Ecto Light Kit is a Hight Power Light Kit based on the HB-2 LED Light Controller. The Element RC Ecto Light Kit pumps out TONs of Light, so all of your friends who don't have this kit will be envious of the Scale Look and amazing performance!
The Element RC Ecto Light Kit is plug & play, making installation simple and hassle free!
The Ecto Light kit also come with cleans lenses and a couple FREE Ecto 3D Grille/Light Bucket files to print and add the extra POP, to your build.
Features:
Simple, hassle-free operation
Easy Installation
In-Line Quick Disconnects between Body and Chassis
Includes:
1-HB-2 LED Light Controller
1-Dual Red 5mm
1-27mm Strip LED
1-Clean lenses
3D Print files (Online)
3D Grille Installation:
Start be cutting away the grille section of your Element RC Ecto body.
Note: Cut right on the edge of where the body dips down into the grille area. Be careful not to cutaway too much!
Next you will take your 3D printed grille and insert the 27mm strip LEDs from the rear.
NOTE: Take your time and insert the LED's with care.
NOTE: Insert lenses with care being sure to note any flash or fitment issues with the 3D print. The lenses should fit snug, NOT TIGHT.
You can now slide your assembled grille/light setup into the Ecto body. We recommend a silicone-based adhesive such as ZapGoo, e6000, ShoeGoo or equivalent.
Rear LED Installation:
To install the tail lights on your Ecto, you will need to first make some holes in the body where you would like to locate your LEDs.
Note: Be sure not to make your holes too big, the LED holder will not work correctly.