-40%
J-B Weld Original and Kwik Epoxy and Permatex Thread Locker Combo Kit (4 cards)

J-B Weld Original and Kwik Epoxy and Permatex Thread Locker Combo Kit (4 cards)

$ 12.77

Availability: 76 in stock
  • Brand: Nook and Tranny
  • Item must be returned within: 30 Days
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: UX0001
  • Warranty: No Warranty
  • Returns Accepted: Returns Accepted
  • Condition: New
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer

    Description

    New Permatex threadlocker and JB Weld kit.  This kit includes a total of 4 cards : J-B Weld Original Cold-Weld formula, J-B Weld KwikWeld Steel Reinforced Epoxy, Permatex High Strength Thread Locker and Permatex Medium Strength Thread Locker, 1 of each.
    Permatex High Strength Red Gel threadlocker #27005 : This is the red gel, medium strength.  .18 oz squeeze tube.  This is for use on fasteners 3/8" to 1" in thread size, where you do not want the fastener/bolt to loosen on it's own.
    Permatex Medium Strength Blue Gel threadlocker #24005 : This is the blue gel, high strength.  .18 oz squeeze tube.  This is for use on fasteners 3/8" to 1" in thread size, where you do not want the fastener/bolt to loosen on it's own.
    J-B Weld Original Cold-Weld™ Formula Steel Reinforced Epoxy #8265S :  Works on multiple surfaces, however, we use it exclusively on metal.  This kit includes 2x 1 oz squeeze tubes : 1 oz of steel epoxy, 1 oz of hardener.
    Contents need to be mixed, then applied.
    This has a cured strength of 3960 PSI.  Takes 4-6 hours to set, 15-25 hours to cure.  550 degree maximum temperature usage when cured, and can also be drilled or tapped when cured.
    J-B Weld KwikWeld™ Steel Reinforced Epoxy #8276 :  Works on multiple surfaces, however, we use it exclusively on metal.  This kit includes 2x 1 oz squeeze tubes : 1 oz of steel epoxy, 1 oz of hardener.  Contents need to be mixed, then applied.  This has a cured strength of 2424 PSI.  Takes 6 minutes to set, 4-6 hours to cure.  230 degree maximum temperature usage when cured, and can also be drilled or tapped when cured.
    TIPS :
    Fasteners sealed with blue threadlocker can typically be removed with hand tools, fasteners sealed with red threadlocker typically require a larger leverage tool, an impact gun, or heat for removal.  We typically use blue for thread locking fasteners that do not rotate or are not in high vibration areas.  We typically use red for fasteners in high vibration areas (like brake caliper bolts) or rotational areas (such as a camshaft bolt).