2-DMX 512 3-Pin Lighting Terminator, Money Back Guarantee!

Description

YOU ARE BIDDING ON
TWO
PROFESSIONAL GRADE
3-PIN DMX 512
TERMINATOR
Built by Hand in the
U
S
A
Bid with confidence. I will do everything possible to gain positive feedback from you!
How to make sure what you have bought is within DMX 512 Specifications
U
se a multimeter set on Ohms or resistance most of the time it is the same setting as continuity.  Attach the leads between pin 2 and 3 the meter should read somewhere in-between 114 Ohms to 126 Ohms ideally it should read 120 Ohms. While you are checking, check to make sure there are no dead shorts.  By having the meter set to continuity and attaching the leads between pin 1 and 2 then pin 1 and 3 then put one of the leads on the metal part of the connector and touch each pin. None of these tests should show a dead short
if you buy one of my terminators all of these tests have been completed before shipment
Lighting Terminators are Ideal for
Features
3-Pin Male XLR
only 1-3/4" long
Metal Oxide Film Resistor which includes
a
non-flammable
Coating
Each Resistor is 1/2-watt 120-Ohms with 5% Tolerance
4% Silver bearing solder
Hand built in the
U
S
A
100% quality control every piece is individually tested to DMX 512 Specifications
60-day money back warranty. Once the item is shipped back.
After 60 days I will replace with a new item for up to a year,  Once the item is shipped back.
Lighting Designers-Lighting Technicians-Bands-Churches-Mobile DJ-Schools-
Clubs-Automated home lighting